NOVAR 2400 T18 E- reactive power controller

We will be happy to advise you:

+420 777 730 002 +420 777 730 004 kbh@kbh.cz

NOVAR 2400 T18 E- reactive power controller

NOVAR 2400 T18 E reactive power controller 90 - 275 V AC, 18 stages (18 transistors), Ethernet, 3f metering, separate power supply, power meter, USB service port. Regulators are fully automatic devices that monitor the condition of the LV/LV distribution network and, based on fast and accurate calculations, connect or disconnect individual compensation or decompensation stages (capacitors, decompression inductors) to achieve the desired power factor.

Order number: N2400T18E

Add to compare list Add to favourites

The NOVAR 2400 is a new model of the innovated NOVAR 2xxx PFC line. It builds on powerful modern platform shared among other PFC and PQ instruments and offers fast three-phase measurement and control combined with multi-functional panel meter.

Fast Ethernet with web server, modbus, SNTP and other features and RS-485 serial line can be used to remotely control and supervise the compensation cabinet. Manipulation with instrument data and configurations can be restricted only to authorized users and all Ethernet communication can be optionally secured by encryption.

NOVAR 2400 shares its key features and parameters with NOVAR 2100/2200 and NOVAR 2600 controllers.

Key features

panel mount version, size 144x144 mm
up to 18 outputs, Relay or Transistor (R09, R16, R18, T7R9, T9R9, T16, T18)
Ethernet
measures and controls power factor and other quantities in each line
supports both low and high voltage applications (direct or VT connection)
support for all possible combinations of single-, two- and three-phase capacitors and chokes
combined mains compensation & decompensation capability
evaluation of total harmonic distortion (THD) level by up to the 50-th harmonic
embedded four quadrant active and reactive energy meter class 0.5S and data logger
fully configurable alarm or cooling/heating control relay

Relay output	18
Supply voltage [V]	90 - 275 V AC, oddělené
Sensitivity	2 mA
Overvoltage category	III - do 300V DC
Required power factor	0,8 ind. ÷ 0,8 kap.
Communication interface	Ethernet, USB
Width [mm]	144
Depth [mm]	80
Height [mm]	144
Weight [g]	700
Mounting type	Panel
Software	NE
Protocols	Modbus RTU
Relative humidity	5 až 100 %
Step value setting	automatické nebo ruční
Connection mode setting	automatické nebo ruční
Temperature measuring range/accuracy	-30 ÷ 60 °C, ± 5 °C
Operating temperature	-40... +60 °C
Degree of protection / IP rating	zadní panel - IP20, čelní panel - IP40 (případně IP54)

Návody

KMB Novar 2400 - rychlé nastavení.pdf

Stáhnout

NOVAR2400_ MANUAL_v3.0_CZ_.pdf

Stáhnout

NOVAR2400_ MANUAL_v4.0_EN_rev1.7.pdf

Stáhnout

Plánovací tabulka kompenzace.pdf

Stáhnout

Regulátory_Katalogový list 1.25.pdf

Stáhnout

Zvýrazněné položky jsou povinné.