FCR06-6RS - reactive power controller

We will be happy to advise you:

+420 777 730 002 +420 777 730 004 kbh@kbh.cz

FCR06-6RS - reactive power controller

FCR06 - The power factor controllers FCR06 and FCR12 are well proven controllers for LV and MV applications as well as for fast and hybrid thyristor power factor correction applications. The power factor controllers FCR06 and FCR12 offer advanced functionality, the automatic detection of measuring circuits and capacitor steps, three-phase current measurement, and also reliability and design for the hardest conditions.

Order number: FCR06-6RS

Add to compare list Add to favourites

Power factor controller FCR06

The power factor controllers FCR06 and FCR12 are well proven controllers for LV and MV applications as well as for fast and hybrid thyristor power factor correction applications. The power factor controllers FCR06 and FCR12 offer advanced functionality, the automatic detection of measuring circuits and capacitor steps, three-phase current measurement, and also reliability and design for the hardest conditions.

In unbalanced systems it is necessary to measure current in each phase and calculate needed compensation power from real three-phase powers. FCR06T and FCR12T controllers are available with three current inputs.

4 quadrant measurement and regulation
three regulation methods (APFR default)
ready for classic, dynamic and hybrid PFC
monitoring of U, I, P, Q, S, cosφ, THDU, THDI,
monitoring of odd harm. of U and I till 19^th order
thyristor control speed up to 25 operations in 1 s
6 or 12 regulated outputs
ready for de-compensation PFC

Function

Device digitizes measured phase voltage and current in one phase. Then, from those values, parameters like: power factor, effective values of voltage and current, apparent power and reactive power, are calculated. With consideration of requested cosφ it calculated need compensation power. According to its size, regulator switches on or off appropriate capacitor stages.

Within the scope of each power level, regulator uses method of circle switching. All the time connects this stage at appropriate power level which was switched off for longest time. Everything is made so that regulator will reach optimal compensation in one regulation cycle with minimum number of switched stages.

Alarms

Power factor controllers FCR06 and FCR12 have several alarms which are adjustable by level, min time of event, action on regulated steps etc. Special alarm from temperature is able to control forced ventilation of PFC and protect capacitor steps against higher temperature.

De-compensation

The controllers FCR06 and FCR12 have features for smart de-compensation with several reactor steps operating in a similar way as capacitor steps or only one reactor that is tuned by capacitor steps.

Cascade operation of two controllers

Two controllers in variant C can be connected together to expand the number of controlled steps or substitute for each other in a system with two main power supplies. Any one of controllers can behave as a master or slave.

Software

Thanks for software Power Monitor System is possible controllers with RS485 easily configured and also use for monitoring of PFC systems.

Supply voltage [V]	400 V AC 50 Hz +10%, -20%
Width [mm]	144
Depth [mm]	55
Height [mm]	144
Weight [g]	1500
Operating temperature	-25... +70°C
Panel cutout	138 x 138 mm
Degree of protection / IP rating	IP20
Current range [A]	0,01 - 5,3
Number of output channels	6
Power consumption [VA]	10
Compensation step value setting	ručně / automaticky
Deactivation delay: semiconductor/contactor stages	0s / 5 - 600 s
Re-activation delay: semiconductor/contactor stages	0s / 5 - 600 s

Návody

BMR_FCR12RX_cz.pdf

Stáhnout

BMR_FCR12RX_en_v3-8.pdf

Stáhnout

Zvýrazněné položky jsou povinné.